Okuma FDK 8HR-4/3FAUPC, 9.6 Volt, 4500mAh Replacement PLC Battery
FDK 8HR-4/3FAUPC; 9.6 Volt, 4500mAh NIMH Replacement PLC Battery for:
Okuma E5503-07E-001, MB4000, MB4000A
NOTICE: This battery has a 3 - 5 day lead time
This Okuma FDK 8HR-4/3FAUPC replacement battery pack is constructed of genuine FDK cells and the exact same connector as the OEM*.
This Battery is Proudly assembled in the USA!
This is not a Chinese replica! How to tell and Why?
1) Check the capacity, is is less than4500mAh?
If Yes the pack could prematurely fail!
2) Does it say "Made in China" or have chinese characters?
If Yes, the answer is simple.
3) Are the batteries used genuine FDK cells?
If you can't tell, ask the reseller or producer of the battery!
FDK 8HR-4/3FAUPC Specifications
Voltage: 9.6 Volts
Capacity: 4500 mAh
Chemistry: NIMH
Dimensions:
Length: 2.75"
Width: 1.375"
Height: 2.6875"
Wire Harness Length: 10.25"
Note:
This battery pack does NOT require a Hazmat shipping fee when Expedited shipping is required!
Replaces
Okuma E5503-07E-001
Okuma MB4000
Okuma MB4000A
Cameron Sino CS-FMB400SL (3800 mAh Chinese Brand)
Dantona Custom-480 (3800 mAh Chinese Brand)
* One Source Batteries was the first company to build the replacement battery for the
Okuma E5503-07E-001, MB4000, MB4000A and the
Sanyo Cadnica 8HR-4/3FAUPC PLC Battery
This assembly consists of 19 components and all are sourced and tested before shipping these battery packs out!
For over 10 years One Source Batteries has been a trusted source for all of your PLC Replacement Battery needs!
Thank you for choosing One Source Batteries!
Because of You American workers are creating products here in the USA
Okuma E5503-07E-001, MB4000, MB4000A
NOTICE: This battery has a 3 - 5 day lead time
This Okuma FDK 8HR-4/3FAUPC replacement battery pack is constructed of genuine FDK cells and the exact same connector as the OEM*.
This is not a Chinese replica! How to tell and Why?
1) Check the capacity, is is less than4500mAh?
If Yes the pack could prematurely fail!
2) Does it say "Made in China" or have chinese characters?
If Yes, the answer is simple.
3) Are the batteries used genuine FDK cells?
If you can't tell, ask the reseller or producer of the battery!
FDK 8HR-4/3FAUPC Specifications
Voltage: 9.6 Volts
Capacity: 4500 mAh
Chemistry: NIMH
Dimensions:
Length: 2.75"
Width: 1.375"
Height: 2.6875"
Wire Harness Length: 10.25"
Note:
This battery pack does NOT require a Hazmat shipping fee when Expedited shipping is required!
Replaces
Okuma E5503-07E-001
Okuma MB4000
Okuma MB4000A
Cameron Sino CS-FMB400SL (3800 mAh Chinese Brand)
Dantona Custom-480 (3800 mAh Chinese Brand)
* One Source Batteries was the first company to build the replacement battery for the
Okuma E5503-07E-001, MB4000, MB4000A and the
Sanyo Cadnica 8HR-4/3FAUPC PLC Battery
This assembly consists of 19 components and all are sourced and tested before shipping these battery packs out!
For over 10 years One Source Batteries has been a trusted source for all of your PLC Replacement Battery needs!
Because of You American workers are creating products here in the USA
DISCLAIMER
The pricing on our website are subject to change without notice.
Several of our manufacturers and suppliers are modifying pricing up to the point of shipment.
We apologize for this inconvenience but this is beyond the control of One Source Batteries.